COMPACT & PRACTICAL, OPTIMISED FOR LIGHTER FORESTAY LOADS.

The Reefit Tasman 110 brings our offshore, battle-tested furling technology to smaller cruising yachts, trailer sailers, and sports boats. Engineered specifically for lower-load forestay configurations, it eliminates common industry failure points through rugged structural engineering and simplified mechanical internals. Like our heavy-duty ocean units, the Tasman 110 requires zero grease or complex servicing—just an occasional freshwater flush.

Technical Specifications

Typical Boat Length: 7.5m – 9.5m (24.6ft – 31.2ft)

Forestay Wire Size Compatibility: 6mm (1/4”)

Clevis Pin Diameter: 11mm (7/16” imperial equivalent)

Typical Sail Area: 25 – 40 m² (269 – 430 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals

Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s in The Box?

Every Reefit Tasman 110 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Lower Drum Unit: High-capacity drum with open-race Torlon bearing assembly for instant salt flushing.

• Halyard Swivel: High-load, smooth-rotating overhead slider block designed to prevent halyard wrap.

• Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners and rivets.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a standard 8mm or 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.

⚠️ Important Sizing Note: The Tasman 110 is optimised for standard 6mm wire systems. If your chainplate pin diameter matches the 11mm requirement but your wire size or toggle width varies from standard setups, please email us directly at sails@reefitsystems.com.au before purchasing so we can verify or custom-match your configurations.

Shipping & Installation

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Perfect for handy boat owners to assemble on the hard, on a trailer, or directly at the marina berth without requiring specialised rigging tools.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 8m | 10m | 12m | 14m

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

VERSATILE & BALANCED, STEP-UP FOR POPULAR PRODUCTION YACHTS.

The Reefit Tasman 120 is the ideal step-up unit tailored for popular mid-sized pocket cruisers, production yachts, and club racers. It provides an upgrade in load capacity over the 110, allowing coastal cruisers to carry efficient, progressively reefed headsails with complete confidence when conditions worsen. Built around a precision 12.7mm (1/2") clevis pin core, it strikes the ultimate balance between a lightweight bow footprint and robust blue-water reliability.

Technical Specifications

Typical Boat Length: 9.0m – 11.0m (29.5ft – 36.0ft)

Forestay Wire Size Compatibility: 6mm, 7mm or 8mm (1/4”, 9/32” or 5/16”)

Clevis Pin Diameter: 12.7mm (1/2” imperial equivalent)

Typical Sail Area: 25 – 40 m² (269 – 430 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals

Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s In The Box?

Every Reefit Tasman 120 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Lower Drum Unit: High-capacity drum with open-race Torlon bearing assembly for instant salt flushing.

• Halyard Swivel: High-load, smooth-rotating overhead slider block designed to prevent halyard wrap.

• Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove sections, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a standard 8mm or 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.

⚠️ Important Sizing Note: If your chainplate pin diameter matches the 12.7mm requirement but your wire size or toggle configuration varies from standard 6mm–8mm setups, please email us directly at sails@reefitsystems.com.au before purchasing so we can custom-verify your setup.

Shipping & Installation

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Perfect for handy boat owners to assemble on the hard, on a trailer, or directly at the marina berth without requiring specialised rigging tools.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

RUGGED & REINFORCED, BUILT FOR HIGH-TORQUE COASTAL CRUISING.

The Reefit Tasman 140 is built to handle the higher structural loads generated by dedicated 30 to 40-foot coastal cruising yachts. Engineered specifically around an 8mm forestay wire and 14mm clevis pin standard, this unit features heavily reinforced structural internals to manage high sail torque during heavy-weather reefing. It eliminates the complex, failure-prone tensioning setups of other brands, delivering smooth, frictionless control under load.

Technical Specifications

Typical Boat Length: 10.0m – 12.0m (32.8ft – 39.3ft)

Forestay Wire Size Compatibility: 8mm (5/16”)

Clevis Pin Diameter: 14mm (9/16” imperial equivalent)

Typical Sail Area: 35 – 60 m² (376 – 645 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals

Warranty / Service Life:10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s In The Box

Every Reefit Tasman 140 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Lower Drum Unit: High-capacity drum with open-race Torlon bearing assembly for instant salt flushing.

• Halyard Swivel: High-load, smooth-rotating overhead slider block designed to prevent halyard wrap.

• Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a standard 8mm or 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.

⚠️ Important Sizing Note: If your chainplate pin matches the 14mm profile but your forestay wire size differs from 8mm, please email us directly at sails@reefitsystems.com.au before purchasing so we can custom-verify your setup.

Shipping & Installation

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Shipped in manageable, cost-effective 2-metre bundles. Perfect for handy boat owners to assemble on the hard or directly at the marina berth without requiring specialised rigging swaging presses.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

ENGINEERED FOR OVERSIZED RIGGING AND BOW CONFIGURATIONS.

The Reefit Tasman 160 is engineered for substantial production cruising yachts requiring a beefier 16mm clevis pin configuration without stepping up to an oversized, heavy offshore drum assembly. It is highly versatile, perfectly accommodating both 8mm and 10mm forestay wires. This makes it a favorite for blue-water sailors looking to upgrade their rigging wire size for safety while keeping their deck hardware streamlined and easy to operate shorthand.

Technical Specifications

Typical Boat Length: 11.0m – 13.0m (36.0ft – 42.6ft)

Forestay Wire Size Compatibility: 8mm to 10mm (5/16” – 3/8”)

Clevis Pin Diameter: 16mm (5/8” imperial equivalent)

Typical Sail Area: 35 – 60 m² (376 – 645 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodized aluminium, 316 stainless steel, fully isolated dissimilar metals

Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s In The Box

Every Reefit Tasman 160 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Lower Drum Unit: High-capacity drum with open-race Torlon bearing assembly for instant salt flushing.

• Halyard Swivel: High-load, smooth-rotating overhead slider block designed to prevent halyard wrap.

• Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a standard 8mm or 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.

⚠️ Important Sizing Note: The Tasman 160 covers a broad wire range (8mm–10mm). Please state your exact wire size in the order notes or email us at sails@reefitsystems.com.au so we can include any custom adapter bushings required for your bow tang.

Shipping & Installation

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Shipped in manageable, 2-metre boxes. Perfect for handy boat owners to assemble on the hard or directly at the marina berth without requiring specialised rigging swaging presses.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

A versatile Reefit furler for mid-sized cruising yachts.

Named after the rugged, storm-swept Furneaux Group in Bass Strait, the Reefit Furneaux 160 is engineered as a heavy-duty transition unit for dedicated offshore cruising yachts up to 46 feet. This unit features a significantly enlarged lower drum housing and deep structural walls to handle the extreme torque generated by large, heavy-displacement cruising headsails up to 75 m². It is purpose-built for harsh blue-water exposure where equipment failure is not an option.

Technical Specifications

Typical Boat Length: 12.0m – 14.0m (39.3ft – 45.9ft)

Forestay Wire Size Compatibility: 10mm (3/8”)

Clevis Pin Diameter: 16mm (5/8” imperial equivalent)

Typical Sail Area: 50 – 75 m² (538 – 807 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Ultra-large dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals:

Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s In The Box

Every Reefit Furneaux 160 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Reinforced Lower Drum Unit: Offshore-spec high-load drum with open-race Torlon bearings for rapid salt clearance.

• Offshore Halyard Swivel: Heavy-duty, smooth-rotating overhead slider designed to manage severe halyard side-loads.

• Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a standard 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.

⚠️ Important Sizing Note: The Furneaux 160 features an upgraded, high-capacity drum base. To verify proper clearance inside narrow bow sprits or anchor rollers, we suggest emailing bow photos to sails@reefitsystems.com.au before purchasing.

Shipping & Installation Details

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Shipped in manageable, 2-metre boxes. Perfect for handy boat owners to assemble on the hard or directly at the marina berth without requiring specialised rigging swaging presses.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m | 22m

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

Stronger capacity for larger cruising and offshore installations.

Named after the imposing cliffs of Schouten Island, the Reefit Schouten 190 is a true blue-water voyaging system designed for heavy displacement long-range cruising yachts. Built around a massive 19mm (3/4") clevis pin core and matching up to 12mm forestay wires, the Schouten 190 utilizes thick-walled aerodynamic foil profiles engineered to withstand severe mast panting and structural deformation during long stretches in heavy ocean conditions.

Technical Specifications

Typical Boat Length: 13.0m – 15.5m (42.6ft – 50.8ft)

Forestay Wire Size Compatibility:10mm to 12mm (3/8” – 7/16”)

Clevis Pin Diameter:19mm (3/4” imperial equivalent)

Typical Sail Area: 55 – 90 m² (592 – 968 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Ultra-large dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals

Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s In The Box

Every Reefit Schouten 190 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Armored Lower Drum Unit: Ultra-high capacity ocean drum with open-race Torlon bearings for effortless freshwater flushing.

• Max-Load Halyard Swivel: Reinforced overhead slider block designed to safely distribute massive halyard tension.

• Heavy-Wall Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: High-strength alignment sleeves and a complete set of marine-grade stainless fasteners.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a premium 10mm low-stretch furling line, and heavy-duty deck lead blocks.

⚠️ Important Sizing Note: The Schouten 190 manages substantial line and rigging loads. Please connect with us at sails@reefitsystems.com.au to confirm your exact turnbuckle configuration and pin height clearance prior to final assembly.

Shipping & Installation

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Shipped in manageable, cost-effective 2-metre bundles. Perfect for handy boat owners to assemble on the hard or directly at the marina berth without requiring specialised rigging swaging presses.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m | 22m

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

The heavy-duty Reefit furler for larger yachts and serious offshore use.

The Reefit Maatsuyker 220 is our flagship ocean-cruising system, named after the wild, storm-lashed Maatsuyker Island group off Tasmania’s southern coast. This unit was explicitly selected by Ken Gourlay for his solo, non-stop world record circumnavigation, surviving sustained 74-knot Southern Ocean survival storms without a single mechanical glitch. Engineered for heavy-displacement world-cruising vessels carrying up to 140 m² of canvas, it is the ultimate expression of indestructible, maintenance-free sail control.

Technical Specifications

Typical Boat Length: 14.50m – 18.5m (47.5ft – 60.6ft)

Forestay Wire Size Compatibility: 12mm to 14mm (1/2” – 9/16”)

Clevis Pin Diameter: 22mm (7/8” imperial equivalent)

Typical Sail Area: 70 – 140 m² (753 – 1506 ft²)

Foil Profile: Twin-groove structural alloy (allows twin running sails)

Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)

Bearing System: Max-diameter dual-race open Torlon® ball bearings (zero grease required)

Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals

Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life

What’s In The Box

Every Reefit Maatsuyker 220 kit is shipped as a comprehensive, ready-to-assemble marine system:

• Armored Lower Drum Unit: Structural, heavy-walled drum with max-diameter open Torlon bearing races for instant salt clearance.

• Max-Load Halyard Swivel: Armored overhead slider block built to manage extreme wire loads and prevent halyard wrap.

• Heavy-Wall Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.

• Internal Joiners & Fasteners: High-strength alignment sleeves and a complete set of marine-grade stainless fasteners and rivets.

• Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.

• DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.

What You Will Need to Supply: Your existing or new forestay wire, a premium 10mm or 12mm low-stretch furling line, and heavy-duty deck lead blocks.

⚠️ Important Sizing Note: Due to the severe structural loads managed by the Maatsuyker 220, a brief technical confirmation call is highly recommended. Please forward your vessel's displacement and full rigging dimensions to sails@reefitsystems.com.au to secure processing validation.

Shipping & Installation

• Free Shipping: We include delivery to most Australian locations at no extra charge.

• DIY-Friendly Design: Shipped in manageable, 2-metre boxes.

• Professional Installation Is Recommended - Due to the size and load range of this model, professional installation is recommended unless the owner has suitable rigging experience.

• Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.

• Available Foil Kit Options: 12m | 14m | 16m | 18m | 20m | 22m | 24

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

Tasman Furler Extension Links

Upgrade or fine-tune your furling system with Reefit Furler Extension Links—precision-engineered components designed to deliver reliable performance, strength, and compatibility across a wide range of marine applications.

Built for durability in harsh marine environments, these extension links provide a simple, effective way to adjust furling drum height or connect components with confidence.

Key Features

• Marine-grade construction for strength and corrosion resistance

• Precision-machined clevis ends for secure, accurate fitment

• Multiple lengths available to suit different rigging requirements

• Wide range of pin sizes to match common furling systems

• Consistent tolerances for dependable installation and performance

Available Sizes & Specifications

100mm Extension Link (12.7mm / 1/2" Pin)

• Pin Centre length: 100mm

• End radius: 20mm

• Thickness at hole: ~8mm

• Clevis gap: ~15mm

• Material thickness: 4mm

150mm Extension Link (12.7mm / 1/2" Pin)

• Pin Centre length: 150mm

• End radius: 20mm

• Thickness at hole: ~8mm

• Clevis gap: ~15mm

• Material thickness: 4mm

200mm Extension Link (12.7mm / 1/2" Pin)

• Pin Centre length: 200mm

• End radius: 20mm

• Thickness at hole: ~8mm

• Clevis gap: ~15mm

• Material thickness: 4mm

Applications

• Adjusting furling drum height

• Aligning forestay and rigging components

• Custom yacht and marine setups

• Replacement or upgrade of existing extension links

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

Reefit Furler Extension Links

Upgrade or fine-tune your furling system with Reefit Furler Extension Links—precision-engineered components designed to deliver reliable performance, strength, and compatibility across a wide range of marine applications.

Built for durability in harsh marine environments, these extension links provide a simple, effective way to adjust furling drum height or connect components with confidence.

Key Features

• Marine-grade construction for strength and corrosion resistance

• Precision-machined clevis ends for secure, accurate fitment

• Multiple lengths available to suit different rigging requirements

• Wide range of pin sizes to match common furling systems

• Consistent tolerances for dependable installation and performance

Size & Specifications

Furneaux Series (15.8mm / 5/8" Pin)

• 150mm – Centre length: 150mm

• End radius: 25mm

• Thickness at hole: ~10mm

• Clevis gap: ~17mm

• Material thickness: 5mm

• 200mm – Centre length: 200mm

• End radius: 25mm

• Thickness at hole: ~10mm

• Clevis gap: ~17mm

• Material thickness: 5mm

• 300mm – Centre length: 300mm

• End radius: 25mm

• Thickness at hole: ~10mm

• Clevis gap: ~17mm

• Material thickness: 5mm

Applications

• Adjusting furling drum height

• Aligning forestay and rigging components

• Custom yacht and marine setups

• Replacement or upgrade of existing extension links

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

Reefit Furler Extension Links

Upgrade or fine-tune your furling system with Reefit Furler Extension Links—precision-engineered components designed to deliver reliable performance, strength, and compatibility across a wide range of marine applications.

Built for durability in harsh marine environments, these extension links provide a simple, effective way to adjust furling drum height or connect components with confidence.

Key Features

• Marine-grade construction for strength and corrosion resistance

• Precision-machined clevis ends for secure, accurate fitment

• Multiple lengths available to suit different rigging requirements

• Wide range of pin sizes to match common furling systems

• Consistent tolerances for dependable installation and performance

Size & Specifications

Schouten Series (19mm / 3/4" Pin)

200mm Extension Link

• 200mm – Centre length: 200mm

• End radius: 27mm

• Thickness at hole: ~10mm

• Clevis gap: ~23mm

• Material thickness: 5mm

300mm Extension Link

• 300mm – Centre length: 300mm

• End radius: 27mm

• Thickness at hole: ~10mm

• Clevis gap: ~23mm

• Material thickness: 5mm

Applications

• Adjusting furling drum height

• Aligning forestay and rigging components

• Custom yacht and marine setups

• Replacement or upgrade of existing extension links

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.

Reefit Furler Extension Links

Upgrade or fine-tune your furling system with Reefit Furler Extension Links—precision-engineered components designed to deliver reliable performance, strength, and compatibility across a wide range of marine applications.

Built for durability in harsh marine environments, these extension links provide a simple, effective way to adjust furling drum height or connect components with confidence.

Key Features

• Marine-grade construction for strength and corrosion resistance

• Precision-machined clevis ends for secure, accurate fitment

• Multiple lengths available to suit different rigging requirements

• Wide range of pin sizes to match common furling systems

• Consistent tolerances for dependable installation and performance

Size & Specifications

Maatsuyker Series (22mm / 7/8" Pin)

• 300mm – Centre length: 300mm

• End radius: 33mm

• Thickness at hole: ~12mm

• Clevis gap: 25mm

• Material thickness: 6mm

• Custom Size

• Call to discuss

Applications

• Adjusting furling drum height

• Aligning forestay and rigging components

• Custom yacht and marine setups

• Replacement or upgrade of existing extension links

The Reefit Relaunch

Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.

This is our very first production run since restarting.

Demand is exceptionally high, and stock is limited.

Configure your specifications below to secure your system.