Stronger capacity for larger cruising and offshore installations.
Named after the imposing cliffs of Schouten Island, the Reefit Schouten 190 is a true blue-water voyaging system designed for heavy displacement long-range cruising yachts. Built around a massive 19mm (3/4") clevis pin core and matching up to 12mm forestay wires, the Schouten 190 utilizes thick-walled aerodynamic foil profiles engineered to withstand severe mast panting and structural deformation during long stretches in heavy ocean conditions.
Technical Specifications
Typical Boat Length: 13.0m – 15.5m (42.6ft – 50.8ft)
Forestay Wire Size Compatibility:10mm to 12mm (3/8” – 7/16”)
Clevis Pin Diameter:19mm (3/4” imperial equivalent)
Typical Sail Area: 55 – 90 m² (592 – 968 ft²)
Foil Profile: Twin-groove structural alloy (allows twin running sails)
Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)
Bearing System: Ultra-large dual-race open Torlon® ball bearings (zero grease required)
Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals
Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life
What’s In The Box
Every Reefit Schouten 190 kit is shipped as a comprehensive, ready-to-assemble marine system:
Armored Lower Drum Unit: Ultra-high capacity ocean drum with open-race Torlon bearings for effortless freshwater flushing.
Max-Load Halyard Swivel: Reinforced overhead slider block designed to safely distribute massive halyard tension.
Heavy-Wall Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.
Internal Joiners & Fasteners: High-strength alignment sleeves and a complete set of marine-grade stainless fasteners.
Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.
DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.
What You Will Need to Supply: Your existing or new forestay wire, a premium 10mm low-stretch furling line, and heavy-duty deck lead blocks.
⚠️ Important Sizing Note: The Schouten 190 manages substantial line and rigging loads. Please connect with us at sails@reefitsystems.com.au to confirm your exact turnbuckle configuration and pin height clearance prior to final assembly.
Shipping & Installation
Free Shipping: We include delivery to most Australian locations at no extra charge.
DIY-Friendly Design: Shipped in manageable, cost-effective 2-metre bundles. Perfect for handy boat owners to assemble on the hard or directly at the marina berth without requiring specialised rigging swaging presses.
Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.
Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m | 22m
The Reefit Relaunch
Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.
This is our very first production run since restarting.
Demand is exceptionally high, and stock is limited.
Configure your specifications below to secure your system.
Stronger capacity for larger cruising and offshore installations.
Named after the imposing cliffs of Schouten Island, the Reefit Schouten 190 is a true blue-water voyaging system designed for heavy displacement long-range cruising yachts. Built around a massive 19mm (3/4") clevis pin core and matching up to 12mm forestay wires, the Schouten 190 utilizes thick-walled aerodynamic foil profiles engineered to withstand severe mast panting and structural deformation during long stretches in heavy ocean conditions.
Technical Specifications
Typical Boat Length: 13.0m – 15.5m (42.6ft – 50.8ft)
Forestay Wire Size Compatibility:10mm to 12mm (3/8” – 7/16”)
Clevis Pin Diameter:19mm (3/4” imperial equivalent)
Typical Sail Area: 55 – 90 m² (592 – 968 ft²)
Foil Profile: Twin-groove structural alloy (allows twin running sails)
Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)
Bearing System: Ultra-large dual-race open Torlon® ball bearings (zero grease required)
Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals
Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life
What’s In The Box
Every Reefit Schouten 190 kit is shipped as a comprehensive, ready-to-assemble marine system:
Armored Lower Drum Unit: Ultra-high capacity ocean drum with open-race Torlon bearings for effortless freshwater flushing.
Max-Load Halyard Swivel: Reinforced overhead slider block designed to safely distribute massive halyard tension.
Heavy-Wall Foil Extrusions: Robust 2-metre aluminium twin-groove segments, pre-machined for seamless structural alignment.
Internal Joiners & Fasteners: High-strength alignment sleeves and a complete set of marine-grade stainless fasteners.
Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.
DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.
What You Will Need to Supply: Your existing or new forestay wire, a premium 10mm low-stretch furling line, and heavy-duty deck lead blocks.
⚠️ Important Sizing Note: The Schouten 190 manages substantial line and rigging loads. Please connect with us at sails@reefitsystems.com.au to confirm your exact turnbuckle configuration and pin height clearance prior to final assembly.
Shipping & Installation
Free Shipping: We include delivery to most Australian locations at no extra charge.
DIY-Friendly Design: Shipped in manageable, cost-effective 2-metre bundles. Perfect for handy boat owners to assemble on the hard or directly at the marina berth without requiring specialised rigging swaging presses.
Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.
Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m | 22m
The Reefit Relaunch
Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.
This is our very first production run since restarting.
Demand is exceptionally high, and stock is limited.
Configure your specifications below to secure your system.
Image 1 of 11
Image 2 of 11
Image 3 of 11
Image 4 of 11
Image 5 of 11
Image 6 of 11
Image 7 of 11
Image 8 of 11
Image 9 of 11
Image 10 of 11
Image 11 of 11
