Why Choose
Reefit?
easiest to use.
Simple to install.
Engineered to last.
Reefit headsail furlers are built for sailors who want smooth control, simple maintenance, and long-term reliability.
From the first design, the aim was straightforward: build a furler that performs reliably under load — without jamming, seizing, or failing at a critical moment.
Every Reefit system is designed around practical engineering: strong load paths, corrosion-resistant materials, low-friction bearings, and mechanical simplicity.
What Makes Reefit Different:
Smooth furling and reefing under load
Straightforward DIY-friendly installation
Low maintenance ownership
Corrosion control by design
Easy access for rig inspection and adjustment
A proven halyard-wrap solution supplied with every unit
Long service life backed by a 10-year warranty
The Engineering Behind the Reliability
Reefit furlers are built around robust structural design principles, including thick-walled sections, high-strength materials, precision-machined components, and bearing systems selected for sustained radial and axial loads.
Load paths are carefully considered to reduce distortion, minimise stress concentration, and maintain smooth operation under pressure.
Key Design Priorities
Strength and reliability over unnecessary weight reduction
Generous section thickness in critical load areas
Bearing systems designed for continuous marine loads
Mechanical simplicity to reduce failure points
Materials selected for salt, UV, and long-term exposure
Serviceability for long-term ownership
This approach has earned Reefit a loyal following among sailmakers, riggers, and offshore sailors who depend on equipment that performs consistently in demanding conditions.
Designed for Practical Installation
Reefit is engineered to be practical to install, not just strong on paper.
Systems are designed to suit DIY installation by capable owners and crew, with picture-sequence instructions, practical and transportable 2 metre foil sections, and compatibility with standard rigging fittings.
For owners and installers, this means fewer special parts, fewer unnecessary complications and a clearer path from box to working furler.
Trusted by Riggers and Sailmakers
Reefit has earned support among riggers, sailmakers, and offshore sailors because the design is practical, low maintenance, and built for long-term use.
For trade installers, that means straightforward sizing, standard rigging compatibility, easier rigging access, and fewer recurring service issues.
Tested to Understand the Limits
To confirm performance, Reefit components are tested in a controlled environment using a tensile test machine.
This allows sustained and increasing loads to be applied directly through the system, simulating forestay tension, sail forces, and dynamic loading scenarios. By testing in this way, it’s possible to observe how components behave under continuous stress—monitoring deformation, load transfer, and overall structural integrity.
Where required, testing is extended to identify the point of failure. This gives a clear understanding of safety margins and ensures components are engineered to exceed expected loads.
Built for Long-Term Ownership
Reefit systems are designed to remain in service for decades, not just seasons.
With correct selection and installation, a Reefit furler offers smooth operation, low maintenance, corrosion resistance and long-term support — backed by a 10-year warranty.
-
Material selection is fundamental to long‑term reliability in a marine environment.
Reefit systems use materials selected for:
Corrosion resistance under prolonged salt exposure
Structural integrity under sustained load
Dimensional stability over time
Bearings, profiles, and fittings are selected and integrated to work as part of a system, rather than as isolated components. This ensures consistent performance and reduces uneven wear across the system.
The result is a system that continues to operate as intended, even after years of exposure to saltwater, UV, and environmental stress.
-
Reefit systems are designed for hassle-free, low-maintenance requirements.
All components are designed to require minimal maintenance, and all parts are supported through spare parts availability and technical advice.
This allows owners and installers to maintain systems over time rather than treating them as consumable items.
Serviceability is not an afterthought—it is a core part of the design process.
-
Reefit systems have been developed and tested in Tasmanian waters, where equipment is exposed to sustained loads, frequent use, and harsh weather conditions.
Early systems were proven on commercial fishing vessels operating daily at sea, providing a practical benchmark for performance and durability beyond occasional recreational use.
-
Structural performance depends on the ability of components to maintain alignment under load.
Reefit extrusions and structural elements are engineered to provide the stiffness and durability required for sustained operation without unnecessary complexity.
Profiles are designed to:
maintain straightness under continuous load
support smooth and consistent sail handling
resist long-term deformation and fatigue
This ensures that load paths remain stable and bearing systems operate correctly, resulting in reliable furling performance over the long term.
-
Bearing performance is critical to any furling system, particularly under sustained load.
The system is designed to operate without grease or oil, eliminating contamination issues and reducing maintenance requirements to simple freshwater flushing.
Reefit uses Torlon bearing which are designed to:
Operate smoothly and retain their shape and mechanical integrity under extreme loads resisting the plastic deformation typical of common marine plastics
Provide exceptional wear resistance and eliminate the need for messy external lubrication
Resist a wide range of chemicals and contaminants, preventing rust and degradation often encountered in marine environment
Where maintenance is required, bearing components are accessible and serviceable. This approach reduces the need for complete replacement and supports long‑term ownership.
-
Corrosion in marine hardware is often driven by contact between dissimilar metals in a saltwater environment. Reefit systems are designed to minimise this risk through careful material selection and physical separation of components.
In critical areas, bearing materials act as an inert interface between metals, reducing the potential for galvanic interaction and extending service life.
Get the Right
System, First Time.
Choosing the correct furler depends on more than boat length. Rigging size, pin diameter, forestay length, and installation requirements.
Our online selector helps ensure your Reefit system is correctly matched to your boat.
For added confidence, you can book a free 30-minute phone or online consultation to confirm the details before moving ahead.