VERSATILE & BALANCED, STEP-UP FOR POPULAR PRODUCTION YACHTS.
The Reefit Tasman 120 is the ideal step-up unit tailored for popular mid-sized pocket cruisers, production yachts, and club racers. It provides an upgrade in load capacity over the 110, allowing coastal cruisers to carry efficient, progressively reefed headsails with complete confidence when conditions worsen. Built around a precision 12.7mm (1/2") clevis pin core, it strikes the ultimate balance between a lightweight bow footprint and robust blue-water reliability.
Technical Specifications
Typical Boat Length: 9.0m – 11.0m (29.5ft – 36.0ft)
Forestay Wire Size Compatibility: 6mm, 7mm or 8mm (1/4”, 9/32” or 5/16”)
Clevis Pin Diameter: 12.7mm (1/2” imperial equivalent)
Typical Sail Area: 25 – 40 m² (269 – 430 ft²)
Foil Profile: Twin-groove structural alloy (allows twin running sails)
Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)
Bearing System: Dual-race open Torlon® ball bearings (zero grease required)
Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals
Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life
What’s In The Box?
Every Reefit Tasman 120 kit is shipped as a comprehensive, ready-to-assemble marine system:
Lower Drum Unit: High-capacity drum with open-race Torlon bearing assembly for instant salt flushing.
Halyard Swivel: High-load, smooth-rotating overhead slider block designed to prevent halyard wrap.
Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove sections, pre-machined for seamless structural alignment.
Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners.
Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.
DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.
What You Will Need to Supply: Your existing or new forestay wire, a standard 8mm or 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.
⚠️ Important Sizing Note: If your chainplate pin diameter matches the 12.7mm requirement but your wire size or toggle configuration varies from standard 6mm–8mm setups, please email us directly at sails@reefitsystems.com.au before purchasing so we can custom-verify your setup.
Shipping & Installation
Free Shipping: We include delivery to most Australian locations at no extra charge.
DIY-Friendly Design: Perfect for handy boat owners to assemble on the hard, on a trailer, or directly at the marina berth without requiring specialised rigging tools.
Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.
Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m
The Reefit Relaunch
Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.
This is our very first production run since restarting.
Demand is exceptionally high, and stock is limited.
Configure your specifications below to secure your system.
VERSATILE & BALANCED, STEP-UP FOR POPULAR PRODUCTION YACHTS.
The Reefit Tasman 120 is the ideal step-up unit tailored for popular mid-sized pocket cruisers, production yachts, and club racers. It provides an upgrade in load capacity over the 110, allowing coastal cruisers to carry efficient, progressively reefed headsails with complete confidence when conditions worsen. Built around a precision 12.7mm (1/2") clevis pin core, it strikes the ultimate balance between a lightweight bow footprint and robust blue-water reliability.
Technical Specifications
Typical Boat Length: 9.0m – 11.0m (29.5ft – 36.0ft)
Forestay Wire Size Compatibility: 6mm, 7mm or 8mm (1/4”, 9/32” or 5/16”)
Clevis Pin Diameter: 12.7mm (1/2” imperial equivalent)
Typical Sail Area: 25 – 40 m² (269 – 430 ft²)
Foil Profile: Twin-groove structural alloy (allows twin running sails)
Luff Tape Compatibility: No. 6 luff tape (standard cruising sail finish)
Bearing System: Dual-race open Torlon® ball bearings (zero grease required)
Materials & Construction: Marine-grade anodised aluminium, 316 stainless steel, fully isolated dissimilar metals
Warranty / Service Life: 10-Year Comprehensive Warranty / 20+ Year Expected Service Life
What’s In The Box?
Every Reefit Tasman 120 kit is shipped as a comprehensive, ready-to-assemble marine system:
Lower Drum Unit: High-capacity drum with open-race Torlon bearing assembly for instant salt flushing.
Halyard Swivel: High-load, smooth-rotating overhead slider block designed to prevent halyard wrap.
Interlocking Foil Extrusions: Robust 2-metre aluminium twin-groove sections, pre-machined for seamless structural alignment.
Internal Joiners & Fasteners: Structural internal sleeves and a complete set of marine-grade stainless fasteners.
Sail Feeder & Top Cap: Integrated entry guides for smooth, snag-free sail hoisting and top torque protection.
DIY Installation Manual: Step-by-step illustrated guide written in plain, practical language.
What You Will Need to Supply: Your existing or new forestay wire, a standard 8mm or 10mm low-stretch furling line, and deck lead blocks to route the line back to your cockpit.
⚠️ Important Sizing Note: If your chainplate pin diameter matches the 12.7mm requirement but your wire size or toggle configuration varies from standard 6mm–8mm setups, please email us directly at sails@reefitsystems.com.au before purchasing so we can custom-verify your setup.
Shipping & Installation
Free Shipping: We include delivery to most Australian locations at no extra charge.
DIY-Friendly Design: Perfect for handy boat owners to assemble on the hard, on a trailer, or directly at the marina berth without requiring specialised rigging tools.
Foil Kit Ordering Rule: You must select a foil kit to match your rig. Measure your forestay length pin-to-pin and round up to the next available 2-metre increment.
Available Foil Kit Options: 10m | 12m | 14m | 16m | 18m | 20m
The Reefit Relaunch
Our First Production Batch Is Underway.
Following the devastating fire earlier this year, we are officially back on the tools.
This is our very first production run since restarting.
Demand is exceptionally high, and stock is limited.
Configure your specifications below to secure your system.
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
